 |
News |
 |
| Tel： |
0755-86181900 (15 line) |
| Fax： |
0755-86181901 |
| E-mail： |
szpdx@yeah.net |
| |
|
|
 |
News |
Your location：Home 》News 》Enterprise News |
| Pengdouxing teach you how to safely use industrial vacuum cleaner |
1 various models, specifications of the industrial vacuum cleaners, structure performance, their functions are not the same. Therefore, the cleaner the purchase must carefully read the instructions before use, to avoid damage caused by improper use of cleaner and endanger personal safety.
2 industrial vacuum cleaners should be at an altitude of more than 1000 metres, good ventilation, environmental temperature not exceeding 40 DEG C, non flammable, corrosive gas, drying room or similar environment using air.
3 before use, should first be hose and the shell suction connection properly, hose and paragraphs long over and over at the end of the suction nozzle, such as for furniture brush, crevice nozzle, etc. to be tightened securely access floor brush. Because the crevice nozzle inlet less noise, high use, continuous use of time should not be too long.
4 connect the ground, to ensure the safe use of electricity. Before using the check whether the line connected, there is no leakage, no confirmation of Yu, can use.
5 is provided with a vacuum cleaner with automatic winding device when in use, the power line length can be pulled out to use enough, don't put the power line pull head, to see if the power line marked with yellow or red, that is, to stop out. Need to rollback power line, press the button to retract automatically.
6 usually use should pay attention not to make the cleaner water, wet hands can not operate the machine. If be clean places there are large pieces of paper, paper, plastic cloth or greater than Straw caliber things, should be to eliminate them, otherwise easy to cause the suction pipe blockage. The company has a Pengdouxing, can vacuum suction HB series.
7 is used as the cleaning, on different occasions, can properly adjust the suction control device. There is a hole in the pipe, which has a regulating ring, when the adjustment ring to cover the holes on the suction pipe, to the maximum, when the adjustment ring to the hole all exposed, suction is minimal. Some vacuum cleaner motor speed control method is adopted to adjust the suction.
8 when the dust storage barrel found more garbage, garbage removal should be in at the same time remove the dust on the filter, maintain good ventilation channel, in order to avoid congestion caused by suction filter does not decline, motor heating and reduce the service life of the vacuum cleaner.
9 vacuum cleaner used for a period of time, due to excessive dust gathers on the filter, will cause the suction drop. The filter removed using compressed air cleaning, so that the suction recovery. If you clean up after still can not make the suction recovery, illustrate the filter needs to be replaced.
10 industrial vacuum cleaner after use, should be kept in a dry place preservation, if put will affect the service life of electrical insulation and excessive humidity in place. |
|
|
