The first step: install the rule:

High pressure fan at install time to consider the installation to a suitableenvironment. Such as, can be installed in less often after, non flammable and explosive, corrosive and ground smooth place. At the time of installation to have a certain space, in order to extend the service life of the high pressure fan, exhaust fan can be installed on the surrounding environment temperature. Do personnel safety protection, as the daily work to provide a convenient, safeguard the benefit maximizationinstallation.

The second step: use the rules of thumb:

In the high pressure fan when in use, to observe the characteristics of the transmission medium and in the use of the process of high pressure fan itself. Conveying medium high pressure fan temperature is usuallynot more than 40 ℃, medium the maximum particle size not greater thanhalf the minimum clearance. High pressure fan shall not exceed the use of pressure boosting range specified on the nameplate. High pressurefan operation, the main oil tank, auxiliary fuel tank oil level must be two red lines between the oil level gauge. These when in use of the watch,will play a multiplier effect in the work, in the best state to guarantee itsoperation.

The third step: maintenance rules:

Is essential to the maintenance of high pressure fan. For the high pressure blower maintenance work, to do the following:

(1) to clean the wind leaf, the exterior of the housing and the motor outer surface, with more wind leaf surface oil, use detergent soak scrub.

(2) to ensure that the rotating parts to add lubricating oil (grease), actionregulation air valve driving mechanism which is flexible and reliable.

(3) work, check all parts of the abnormal, timely treatment. Such as,check each joint gasket and filler surface of the seal, replace if necessary.

(4) a high pressure blower use environment should be kept clean, high pressure fan surface clean, into the outlet, there should be no debris,regular removal of dust fan and pipe etc.. Proper maintenance will be invisible in the increase of service life of high pressure fan.

For more information about high pressure fan, please clickhttp://www.dg1689.com/。