Products like children need a little care to grow sturdily; high-pressure blower is no exception it in many ways also needs to "take care" to be able to run normally, prolong service life.

The maintenance procedure of high pressure fan actually should buy from start. When you in the selection of high-pressure blower, firstly, they need to select the most suitable products. The structure machine you should pay attention to when:

Due to the use of high-pressure blower is very extensive, and it is selection relatively complex, so the selections of type selection of the time want to choose the correct model so as to avoid the high-pressure blower damage. Generally speaking, need to click below two steps:

1, Need to make sure the scene is to use the high-pressure blower what function, suction or blow, find high-pressure blower corresponding pressure-flow curve; If wrong curve, sometimes can cause elected products can't use or other damage.

2, Calculated according to the pressure and flow of in the graph, found on at the same time satisfy the pressure and flow the undo the work more than corresponding curve; and then based on the working curve choose high-pressure blower type.

3, Make sure the high-pressure blower installation dimensions, if installation size discrepancies, do not install so as not to cause damage.

If you have special requirements such as explosion-proof demand, must with manufacturers’ communication consultation.

High-pressure blowers in installation also need attention problems:

1.must use flat washer and spring washer to step up screw;

2, best can use rubber buffer glue to bear the weight of the high-pressure blower, especially high power of high-pressure blower, indispensable;

3, For some of the occasion for noise, can be attached with muffler to reduce noise (usually, about 5 dB in or so), muffler installed in into the pipe or out of the end of the wind pipe;

4,For some high requirements for noise situation, can according to the conditions of the machine itself, add a layer, can satisfy the scene or a deadened the noise of the requirements, and the specific can inquire high-pressure blower factory or professional noise management company;

5, In use or a mute, notice the mute high-pressure blower and the distance, pay attention to high pressure fan ventilation and cooling, pay attention to use rubber buffer glue to bear the weight of the high-pressure blower, specific need to consult high-pressure blower factory;

6, High pressure of the outlet pipe connection into fan, hose connection should be used to isolate vibration.

High-pressure blower use problems needing attention:

No matter what brand of high-pressure blower, to two aspects: one is the protection of the pressure, and the second is dust.

For pressure, often use is discharging valve, it is a unloading valve, when the use of high-pressure blower pressure commentate pressure valve set more than the pressure after discharging valve, it will automatically open, the extra pressure release, thus protecting high-pressure blower.

For dust, often use the filter. It according to different use, often use the filtration precision filtration of different filter core, different filter have different maintenance methods and service life, in order that you need to ask.

 

In some special occasions, it needs special protection. For example in the sealed environment with, keep ventilation cooling; When environment temperature (inlet temperature is higher), the more should pay attention to ventilation cooling, or choose to allow into the high temperature of the high-pressure blower.

If you do well in the high pressure blower using the maintenance, so you use the process can save a lot of trouble and improve production efficiency, prolong the service life of high pressure fan.